新利彩票

行业新闻

当前位置:网站首页 > 新闻资讯 > 行业新闻

  • 接地棒要怎么安装?
  • 本站编辑:杭州晨诺机械科技有限公司发布日期:2018-05-30 09:29 浏览次数:
1、家装接地线怎样才箄接入地下?
 
家:装接地线的安装相对来说非常的简单,一般用长为1.5-2米的镀锌角钢(镀锌接地扁钢),下端做成尖形,在墙角的地方打入地下,再引出接线即可。
 
2、工程设施接地线怎样才箄接入地下?
 
工程设施的防雷接地系统比较庞大,要通过多根类似裸铜绞线一类的接地线组成接地线组(网状),再在每个接地线交接处下方用砍热焊接连接上接地棒深埋地下,引出接地线即可,目的是为了降低电阻率•
 
以上两种方式就是我们常见的接地线接地方法了,具阼施工方案试憒况而定,有疑间可以来电佰利嘉电气,佰利嘉电气为你解答。

1. How does the home line be connected to the ground?
 
Home: installation of grounding wire installation is relatively simple, usually with a 1.5-2 meter of galvanized angle steel (Galvanized ground flat steel), the lower end to make a sharp, in the corner of the ground into the underground, and then lead to wiring.
 
2. How can the earthing line of the engineering facilities be connected to the underground?
 
The lightning protection grounding system of the engineering facilities is very large. It is necessary to make up the ground line group (net) by the grounding wire like the bare copper wire. Then the grounding rod is deeply buried under the joint of each grounding line. The grounding wire is deeply buried and the grounding wire is brought out. The purpose is to reduce the resistivity.
 
The above two ways are our common grounding wire grounding method.
友情链接:幸运快乐8  幸运快乐8  幸运快乐8  幸运快乐8开奖直播  幸运快乐8开奖直播  幸运快乐8  幸运快乐8  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!